tag:blogger.com,1999:blog-10142333799134125332024-02-07T07:24:12.481+05:30GeekCompTips (No Down Time)Real Time Problems Faced By Geeks and Resolved It.
Keshava Prasadhttp://www.blogger.com/profile/07052995972860667346noreply@blogger.comBlogger42125tag:blogger.com,1999:blog-1014233379913412533.post-82799788820858528172017-11-10T16:39:00.005+05:302022-09-01T18:57:33.461+05:30<div dir="ltr" style="text-align: left;" trbidi="on">
<div align="LEFT">
<br /></div>
<br />
<b><span>How to fix RDS 2012r2 error: </span><i><span style="font-family: Times New Roman,Times New Roman;"><span style="font-family: Times New Roman,Times New Roman;">"Licensing mode for the Remote Desktop Session Host is not configured." </span></span></i></b><br />
<strong><em><span><br /></span></em></strong><br />
<div class="separator" style="clear: both; text-align: center;"><br /></div>
<div class="separator" style="clear: both; text-align: center;">
<span><br /></span></div>
<span><div align="LEFT">
<br /></div>
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
<span style="font-size: small;">Solution </span><br />
<div class="separator" style="clear: both; text-align: center;">
<span style="font-size: small;">
</span></div>
<span style="font-family: Arial,Arial; font-size: small;"><div class="separator" style="clear: both; text-align: center;">
<br /></div>
<span style="font-family: Arial,Arial; font-size: small;"><div class="separator" style="clear: both; text-align: center;">
<br /></div>
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
To fix the problem, run the following commands in powershell to set the licensing server properly on the rd session host using the WMI CIM provider: <br />
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
</span><div class="separator" style="clear: both; text-align: center;">
<br /></div>
</span><b><span style="font-family: Arial,Arial; font-size: small;"><span style="font-family: Arial,Arial; font-size: small;"></span></span></b><span style="font-family: Arial,Arial; font-size: small;"><span style="font-family: Arial,Arial; font-size: small;"></span></span><span style="font-family: Arial,Arial; font-size: small;"><span style="font-family: Arial,Arial; font-size: small;"><b>$obj = gwmi -namespace "Root/CIMV2/TerminalServices" Win32_TerminalServiceSetting $obj. SetSpecifiedLicenseServerList("licserver.domain.local") </b></span></span><span style="font-family: Arial,Arial; font-size: small;"><span style="font-family: Arial,Arial; font-size: small;">Then, go into the registry and manually set the licensing mode: </span></span><b><span style="font-family: Arial,Arial; font-size: small;"><span style="font-family: Arial,Arial; font-size: small;">HKLM\SYSTEM\CurrentControlSet\Control\Terminal Server\RCM\Licensing Core\LicensingMode </span></span></b><span style="font-family: Arial,Arial; font-size: small;"><span style="font-family: Arial,Arial; font-size: small;">You need to change the DWORD to 2 for Per Device or 4 for Per User. </span></span></span><div class="separator" style="clear: both; text-align: center;">
<br /></div>
<div class="separator" style="clear: both; text-align: center;"><br /></div>
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
<span style="font-size: small;">Next, reboot the system. The changes made previously will report everything properly and the RDS host will now recognize the licensing configuration. <br />
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
</span><div class="separator" style="clear: both; text-align: center;">
<br /></div>
<strong><em><br /></em></strong></div>
Keshava Prasadhttp://www.blogger.com/profile/07052995972860667346noreply@blogger.com0tag:blogger.com,1999:blog-1014233379913412533.post-1437555389215769202017-11-10T16:29:00.004+05:302022-09-01T19:00:11.148+05:30Unable to increase resolution to 2560 X1600<div dir="ltr" style="text-align: left;" trbidi="on">
<div align="LEFT">
<br /></div>
<br />
<b><span style="font-size: small;">Issue: </span></b><span style="font-family: "times new roman" , "times new roman"; font-size: x-small;"><span style="font-family: "times new roman" , "times new roman"; font-size: x-small;">Unable to increase resolution to 2560 X1600 </span></span><span style="font-size: x-small;"><br /></span><br />
<span style="font-size: x-small;"></span><br />
<div align="LEFT">
<br /></div>
<span style="font-size: x-small;"><b><span style="font-size: small;">Cause: </span></b><span style="font-family: "times new roman" , "times new roman"; font-size: x-small;"><span style="font-family: "times new roman" , "times new roman"; font-size: x-small;">Less video memory configured in the virtual machine </span></span></span><br />
<br />
<div align="LEFT">
<br /></div>
<br />
<br />
<b><span style="font-size: small;">Resolution: </span></b><br />
<span style="font-family: "calibri" , "calibri"; font-size: small;"><span style="font-family: "calibri" , "calibri"; font-size: small;">1. Edit the vm configuration from vCenter, <br />
2. Click on video memory calculator to check required video memory. <br />
3. For 2560x1600 resolution you need to set 16MB video memory, it won’t be list in video memory calculator </span></span><br />
<div class="separator" style="clear: both; text-align: center;"><br /></div>
<br />
<div class="separator" style="clear: both; text-align: center;"><br /></div>
<br /></div>
Keshava Prasadhttp://www.blogger.com/profile/07052995972860667346noreply@blogger.com0tag:blogger.com,1999:blog-1014233379913412533.post-62078899841934432032017-07-27T21:11:00.004+05:302017-09-07T15:51:30.354+05:30Cannot perform in-place upgrade from WS2012 / WS 2008R2 to WS 2012 R2<div dir="ltr" style="text-align: left;" trbidi="on">
<div class="MsoNormal">
<span style="font-family: "segoe ui" , sans-serif; font-size: 27pt; line-height: 107%;">Cannot perform
in-place upgrade from WS2012 / WS 2008R2 to WS 2012 R2</span><o:p></o:p></div>
<div class="MsoNormal">
<span style="font-family: "segoe ui" , sans-serif; font-size: 27.0pt; line-height: 107%;"><br /></span></div>
<div class="MsoNormal">
<span style="color: #0072c6; font-family: "segoe ui" , sans-serif;"><span style="font-family: Arial, Helvetica, sans-serif;">Issue:</span></span><br />
<span style="color: #0072c6; font-family: "segoe ui" , sans-serif;"><span style="font-family: Arial, Helvetica, sans-serif;">Trying to upgrade from</span></span><br />
<span style="color: #0072c6; font-family: "segoe ui" , sans-serif;"><span style="font-family: Arial, Helvetica, sans-serif;">Windows Server 2012 to Windows Server 2012 R2 The following occurs:</span></span><br />
<span style="color: #0072c6; font-family: "segoe ui" , sans-serif;"><span style="font-family: Arial, Helvetica, sans-serif;">· Copy install files to install directory on local system</span></span><br />
<span style="color: #0072c6; font-family: "segoe ui" , sans-serif;"><span style="font-family: Arial, Helvetica, sans-serif;">· Click Setup.exe.</span></span><br />
<span style="color: #0072c6; font-family: "segoe ui" , sans-serif;"><span style="font-family: Arial, Helvetica, sans-serif;">· UAC requires acceptance.</span></span><br />
<span style="color: #0072c6; font-family: "segoe ui" , sans-serif;"><span style="font-family: Arial, Helvetica, sans-serif;">· Windows Server 2012 R2 appears.</span></span><br />
<span style="color: #0072c6; font-family: "segoe ui" , sans-serif;"><span style="font-family: Arial, Helvetica, sans-serif;">· Click Install Now Button.</span></span><br />
<span style="color: #0072c6; font-family: "segoe ui" , sans-serif;"><span style="font-family: Arial, Helvetica, sans-serif;">· Message: "Setup is copying temporary files."</span></span><br />
<span style="color: #0072c6; font-family: "segoe ui" , sans-serif;"><span style="font-family: Arial, Helvetica, sans-serif;">· Message: "Setup is starting."</span></span><br />
<span style="color: #0072c6; font-family: "segoe ui" , sans-serif;"><span style="font-family: Arial, Helvetica, sans-serif;">· Splash screen reappears.</span></span><br />
<span style="color: #0072c6; font-family: "segoe ui" , sans-serif;"><span style="font-family: Arial, Helvetica, sans-serif;">Cannot get beyond this to the wizard. Tried safe mode, tried from mounted ISO, tried from Install directory with setup files.</span></span><br />
<span style="color: #0072c6; font-family: "segoe ui" , sans-serif;"><span style="font-family: Arial, Helvetica, sans-serif;">No indication of error in any Windows logs</span></span></div>
<div class="MsoNormal" style="background: white; line-height: 125%; margin-bottom: 12.0pt; vertical-align: middle;">
<br /></div>
<div class="MsoNormal" style="line-height: 115%; margin-bottom: 10.0pt;">
<span style="font-family: "segoe ui" , sans-serif; line-height: 115%;">Resolution<span style="color: #0072c6; font-size: 15pt;"><o:p></o:p></span></span></div>
<div class="MsoNormal">
<br /></div>
<div class="MsoNormal" style="line-height: 115%; margin-bottom: 10.0pt;">
<span style="font-family: Arial, Helvetica, sans-serif;">Environment:
My 2012R2 ISO is mounted on D:, Windows system on C:. <o:p></o:p></span></div>
<div class="MsoNormal" style="line-height: 115%; margin-bottom: 10.0pt;">
<span style="font-family: Arial, Helvetica, sans-serif;">Process: Open
an Administrator command prompt and run the following command:<o:p></o:p></span></div>
<div class="MsoNormal" style="line-height: 115%; margin-bottom: 10.0pt;">
<span style="font-family: Arial, Helvetica, sans-serif;">D:\Sources\setup.exe
/HideWelcome /uilanguage:en-US /targetlanguage:en-US /runlocal<o:p></o:p></span></div>
<div class="MsoNormal" style="line-height: 115%; margin-bottom: 10.0pt;">
<span style="font-family: Arial, Helvetica, sans-serif;"><br /></span></div>
<div class="MsoNormal" style="line-height: 115%; margin-bottom: 10.0pt;">
<span style="font-family: Arial, Helvetica, sans-serif;">When prompted
to check for updates, accept and continue. Setup will eventually fail but not
before it has downloaded an updated setup.exe and supporting files to a handful
of folders on C:. These updated files let me complete the installation<o:p></o:p></span></div>
<div class="MsoNormal" style="line-height: 115%; margin-bottom: 10.0pt;">
<span style="font-family: Arial, Helvetica, sans-serif;"><br /></span></div>
<div class="MsoNormal" style="line-height: 115%; margin-bottom: 10.0pt;">
<span style="font-family: Arial, Helvetica, sans-serif;">Run the same
command again <o:p></o:p></span></div>
<div class="MsoNormal" style="line-height: 115%; margin-bottom: 10.0pt;">
<span style="font-family: Arial, Helvetica, sans-serif;">C:\$WINDOWS.~BT\Sources\setup.exe
/runlocal /BTFolderPath:C:\$WINDOWS.~BT /OSImagePath:"D:\Sources"
/HideWelcome /uilanguage:en-US /targetlanguage:en-US<o:p></o:p></span></div>
<div class="MsoNormal" style="line-height: 115%; margin-bottom: 10.0pt;">
<span style="font-family: Arial, Helvetica, sans-serif;"><br /></span></div>
<div class="MsoNormal" style="background: white; line-height: 125%; margin-bottom: 12.0pt; vertical-align: middle;">
</div>
<div class="MsoNormal" style="line-height: 115%; margin-bottom: 10.0pt;">
<span style="font-family: Arial, Helvetica, sans-serif;">This time skip
the updates and the install completed successfully</span><o:p></o:p></div>
</div>
Keshava Prasadhttp://www.blogger.com/profile/07052995972860667346noreply@blogger.com0tag:blogger.com,1999:blog-1014233379913412533.post-49766845619477400802013-07-18T14:52:00.004+05:302013-07-18T15:00:05.824+05:30VM will shows as powered off in VC, but you are able to ping and RDP to it.<div dir="ltr" style="text-align: left;" trbidi="on">
<br />
<div class="MsoNormal" style="margin: 0in 0in 0pt;">
<span style="font-family: inherit;"><span style="color: #f3f3f3;">One of the unusual issues.<o:p></o:p></span></span></div>
<span style="color: #f3f3f3; font-family: inherit;"></span><br />
<span style="color: #f3f3f3; font-family: inherit;"></span><br />
<div class="MsoNormal" style="margin: 0in 0in 0pt;">
<span style="font-family: inherit;"><span style="color: #f3f3f3;">Issue –<span style="mso-spacerun: yes;"> </span>VM will shows as powered off in VC, but you
are able to ping and RDP to it.<o:p></o:p></span></span></div>
<span style="font-family: inherit;"><span style="color: #f3f3f3;"> If you reconfigure the system it will reflect in windows, <o:p></o:p></span></span><br />
<span style="color: #f3f3f3; font-family: inherit;"></span><br />
<div class="MsoNormal" style="margin: 0in 0in 0pt;">
<span style="font-family: inherit;"><span style="color: #f3f3f3;">Cause – VMX will be locked with
other hostname. (Vmotion failure may cause this)<o:p></o:p></span></span></div>
<o:p><span style="color: #f3f3f3; font-family: inherit;"></span></o:p><br />
<div class="MsoNormal" style="margin: 0in 0in 0pt;">
<span style="font-family: Calibri;"><span style="color: black;"><span style="color: #f3f3f3; font-family: inherit;">Fix – Shutdown the OS from RDP
and Power it on from VC.</span> <o:p></o:p></span></span></div>
<br />
</div>
Keshava Prasadhttp://www.blogger.com/profile/07052995972860667346noreply@blogger.com0tag:blogger.com,1999:blog-1014233379913412533.post-21729177004154672142013-03-04T21:47:00.002+05:302013-03-04T21:47:24.431+05:30ESX Host not booting properly <div dir="ltr" style="text-align: left;" trbidi="on">
The problem was related to an abrupt reboot of the ESX host. This then caused the /boot partition to become corrupt.<br />
<br />
<br />
I ran the following commands in ESX maintenance mode to fix /boot:<br />
<br />
esxcfg-boot -p (reloads the PCI data)<br />
<br />
esxcfg-boot -b (sets up boot information) esxcfg-boot -r (refreshes initrd)<br />
<br />
Rebbot the server to normal mode.</div>
Keshava Prasadhttp://www.blogger.com/profile/07052995972860667346noreply@blogger.com0tag:blogger.com,1999:blog-1014233379913412533.post-83747022757203450422013-03-02T09:38:00.002+05:302013-03-02T09:38:48.594+05:30Configuring RDM's on VM Cluster Nodes.<div dir="ltr" style="text-align: left;" trbidi="on">
Configuring RDM's on VM Cluster Nodes.<br />
<br />
Add Hard Disks to the First Node for Clusters Across Physical Hosts<br />
<br />
<br />
In an MSCS cluster, storage disks are shared between nodes. You set up a quorum disk and an optional shared<br />
<br />
storage disk.<br />
<br />
Prerequisites<br />
<br />
Before you add hard disks to the first node, complete the following tasks:<br />
<br />
For each virtual machine, configure the guest operating system’s private and public IP addresses.<br />
<br />
Ask your SAN administrator for the location of unformatted SAN LUNs. The hard disks you create in this<br />
<br />
task must point to SAN LUNs.<br />
<br />
NOTE Use RDMs in physical compatibility mode. The procedure below uses physical compatibility mode.<br />
<br />
Procedure<br />
<br />
1 In the vSphere Client inventory, select the newly created virtual machine and select Edit Settings.<br />
<br />
The Virtual Machine Properties dialog box appears.<br />
<br />
2 Click Add, select Hard Disk, and click Next.<br />
<br />
3 Select Raw Device Mappings and click Next.<br />
<br />
4 Select an unformatted LUN and click Next
5 Select a datastore and click Next.
<br />
<br />
This datastore must be on a SAN because you need a single shared RDM file for each shared LUN on the<br />
<br />
SAN.<br />
<br />
6 Select Physical as the compatibility mode and click Next.<br />
<br />
A SCSI controller is created when the virtual hard disk is created.<br />
<br />
7 Select a new virtual device node (for example, select SCSI (1:0)), and click Next.<br />
<br />
NOTE This must be a new SCSI controller. You cannot use SCSI 0.<br />
<br />
8 Click Finish to complete creating the disk.<br />
<br />
The wizard creates a new SCSI controller and a new hard disk.<br />
<br />
9 In the Virtual Machine Properties dialog box, select the new SCSI controller and click Change Type.<br />
<br />
The Change SCSI Controller Type dialog box appears.<br />
<br />
10 Select the appropriate type of controller, depending on your operating system.<br />
<br />
Operating System Type of Controller<br />
<br />
Windows Server 2003 LSI Logic Parallel<br />
<br />
Windows Server 2008 LSI Logic SAS<br />
<br />
11 Click OK.<br />
<br />
12 On the Virtual Machine Properties dialog box, set SCSI Bus Sharing to Physical and click OK.<br />
<br />
The virtual machine is connected to a public network and a private network with two virtual switches, and is<br />
<br />
connected to the quorum disk on FC SAN and the virtual machine virtual disk on local or remote storage.<br />
<br />
Add Hard Disks to the Second Node for Clusters Across Physical Hosts<br />
<br />
To allow shared access to clustered services and data, point the quorum disk of the second node to the same<br />
<br />
location as the first node’s quorum disk. Point shared storage disks to the same location as the first node’s<br />
<br />
shared storage disks.<br />
<br />
Prerequisites<br />
<br />
Before you begin, obtain the following information:<br />
<br />
n Which virtual device node is for the first virtual machine's shared storage disks (for example, SCSI (1:0)).<br />
<br />
n The location of the quorum disk specified for the first node.<br />
<br />
Procedure<br />
<br />
1 In the vSphere Client inventory, select the second virtual machine that you created and select Edit<br />
<br />
Settings.<br />
<br />
The Virtual Machine Properties dialog box appears.<br />
<br />
2 Click Add, select Hard Disk, and click Next.<br />
<br />
3 Select Use an existing virtual disk and click Next.<br />
<br />
4 In Disk File Path, browse to the location of the quorum disk specified for the first node.<br />
<br />
5 Select Physical as the compatibility mode and click Next.<br />
<br />
A SCSI controller is created when the virtual hard disk is created.<br />
<br />
Setup for Failover Clustering and Microsoft Cluster Service<br />
<br />
6 Select the same virtual device node you chose for the first virtual machine’s shared storage disks (for
<br />
<br />
example, SCSI (1:0)), and click Next.<br />
<br />
NOTE The location of the virtual device node for this virtual machine’s shared storage must match the<br />
<br />
corresponding virtual device node for the first virtual machine.<br />
<br />
7 Click Finish.<br />
<br />
The wizard creates a new hard disk and a new SCSI controller.<br />
<br />
8 In the Virtual Machine Properties dialog box, select the new SCSI controller and click Change Type.<br />
<br />
The Change SCSI Controller Type dialog box appears.<br />
<br />
9 Select the appropriate type of controller, depending on your operating system.<br />
<br />
Operating System Type of Controller<br />
<br />
Windows Server 2003 LSI Logic Parallel<br />
<br />
Windows Server 2008 LSI Logic SAS<br />
<br />
10 Click OK.<br />
<br />
11 Set SCSI Bus Sharing to Physical and click OK.</div>
Keshava Prasadhttp://www.blogger.com/profile/07052995972860667346noreply@blogger.com0tag:blogger.com,1999:blog-1014233379913412533.post-12877293813177649262012-12-11T22:48:00.001+05:302012-12-11T23:22:52.987+05:30Killing a Windows service stuck in the STOP_PENDING state<div dir="ltr" style="text-align: left;" trbidi="on">
Killing a Windows service stuck in the STOP_PENDING state<br />
<br />
<br />
I ran into this issue when I attempted to restart the AdaptiveLogExporterService<br />
<br />
<br />
Find below the steps to kill and restart pending service.<br />
<br />
<br />
Example<br />
<br />
C:\sc queryex AdaptiveLogExporterService<br />
<br />
<br />
<br />
SERVICE_NAME: AdaptiveLogExporterService<br />
<br />
TYPE : 10 WIN32_OWN_PROCESS<br />
<br />
STATE : 3 STOP_PENDING<br />
<br />
(STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN))<br />
<br />
WIN32_EXIT_CODE : 0 (0x0)<br />
<br />
SERVICE_EXIT_CODE : 0 (0x0)<br />
<br />
CHECKPOINT : 0x2<br />
<br />
WAIT_HINT : 0x1388<br />
<br />
PID : 1124<br />
<br />
FLAGS :<br />
<br />
C:\taskkill /PID 1124 /F<br />
<br />
SUCCESS: The process with PID 1124 has been terminated.<br />
<br />
C:\sc start AdaptiveLogExporterService<br />
<br />
<br />
<br />
SERVICE_NAME: AdaptiveLogExporterService<br />
<br />
TYPE : 10 WIN32_OWN_PROCESS<br />
<br />
STATE : 2 START_PENDING<br />
<br />
(NOT_STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN))<br />
<br />
<br />
<br />
WIN32_EXIT_CODE : 0 (0x0)<br />
<br />
SERVICE_EXIT_CODE : 0 (0x0)<br />
<br />
CHECKPOINT : 0x0<br />
<br />
WAIT_HINT : 0x1388<br />
<br />
PID : 4228<br />
<br />
FLAGS :<br />
<br />
<br />
<br />
<br />
<br />
SERVICE_NAME: AdaptiveLogExporterService<br />
<br />
TYPE : 10 WIN32_OWN_PROCESS<br />
<br />
STATE : 4 RUNNING<br />
<br />
(STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN))<br />
<br />
WIN32_EXIT_CODE : 0 (0x0)<br />
<br />
SERVICE_EXIT_CODE : 0 (0x0)<br />
<br />
CHECKPOINT : 0x0<br />
<br /></div>
Keshava Prasadhttp://www.blogger.com/profile/07052995972860667346noreply@blogger.com0tag:blogger.com,1999:blog-1014233379913412533.post-43227085330846922992012-12-11T22:39:00.002+05:302012-12-11T23:22:32.574+05:30IPSEC fails to start with Error 2: The system cannot find the file specified<div dir="ltr" style="text-align: left;" trbidi="on">
IPSEC fails to start with Error 2: The system cannot find the file specified<br />
<br />
<br />
Upon rebooting a Terminal Server that had resource issues, we could not log back into the server through RDP. We could log in through iLO, and it was apparent that the logins were working but they were very slow. Upon examining the services, we could see that the IPSEC service was not started. <br />
<br />
Trying to manually start the service gave the following popup: "Could not start the IPSEC Services service on Local Computer. Error 2: The system cannot find the file specified." The event logs also showed that TCP/IP was in blocking mode. <br />
<br />
Disabling the service and rebooting restored all network communication, but trying to start the service would drop all connectivity again and slow down the server. I found another article that said that IPSEC may need to be rebuilt. When I looked for the registry keys for IPSEC, they were not there. After I ran the following commands, the registry keys were populated, and IPSEC was able to run properly. <br />
<br />
To rebuild IPSEC, follow these steps: <br />
<br />
1. Click Start, click Run, type regedit, and then click OK. <br />
<br />
2. In Registry Editor, locate and then click the following subkey: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\IPsec\Policy\Local. (In my case, the server’s registry ended before IPsec. If this is the case, skip to step 6.) <br />
<br />
3. On the Edit menu, click Delete. <br />
<br />
4. Click Yes to confirm that you want to delete the subkey <br />
<br />
5. Quit Registry Editor <br />
<br />
6. Click Start, click Run, type regsvr32 polstore.dll, and then click OK. <br />
<br />
<a href="http://support.microsoft.com/kb/912023" target="_blank">http://support.microsoft.com/kb/912023</a></div>
Keshava Prasadhttp://www.blogger.com/profile/07052995972860667346noreply@blogger.com0tag:blogger.com,1999:blog-1014233379913412533.post-31085908268692501112012-12-11T22:31:00.000+05:302012-12-11T23:23:15.461+05:30How can I tell if the Microsoft sysprep utility has successfully run on a Windows <div dir="ltr" style="text-align: left;" trbidi="on">
How can I tell if the Microsoft sysprep utility has successfully run on a Windows Vista* operating system?<br />
<br />
<br />
<br />
<br />
Solution<br />
<br />
<br />
<br />
The easiest way to determine whether or not Sysprep has run is to check the following registry location on the client machine: <br />
<br />
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\State. <br />
<br />
<br />
<br />
In this location there will be an ImageState string value. If this value shows as IMAGE_STATE_COMPLETE, Sysprep has run successfully. If any other value is shown, sysprep has not run or has not run successfully. <br />
<br />
<br />
<br />
Another option is to look for the unattend.xml file in C:\Windows\System32\Sysprep. (Sysprep comes installed by default in Windows Vista.) If this file has a current date and timestamp then there's a chance this file was updated during the imaging process. However, the first option is ultimately the best choice.<br />
<br /></div>
Keshava Prasadhttp://www.blogger.com/profile/07052995972860667346noreply@blogger.com0tag:blogger.com,1999:blog-1014233379913412533.post-61419207348765217672012-12-11T22:25:00.000+05:302012-12-11T23:23:33.899+05:30Step by Step Guide to Extend C drive on Windows 2000/XP/Vista with Acronis DD<div dir="ltr" style="text-align: left;" trbidi="on">
Step by Step Guide to Extend C drive on Windows 2000/XP/Vista with Acronis DD<br />
<br />
<br />
Suppose we have four partitions C: 10 gb, E: 40gb, F: 60gb G: 48gb. We need to redistribute the free space 10gb on F: to C:. We will shrink the F: to be 50gb and then move the unallocated 10gb next to C: drive and then we will extend the c drive with the unallocated 10gb. <br />
<br />
Acronis offers the most stable and confidence while resizing the existing partitions. Acronis Disk Director Suite can resize, move, split, merge partitions without data loss. If you want to merge partitions, you can follow this tutorial: How to merge partitions to extend boot partition.<br />
<br />
Here are the steps:<br />
<br />
• You can download free copy of Acronis Disk Director Suite.<br />
<br />
• Check the partition space in disk management before we use Acronis Disk Director Suite.<br />
<br />
<br />
<br />
Run Acronis Disk Director Suite and choose the “Manual Mode”, the right click F: to resize<br />
<br />
<br />
<br />
Put the cursor to the left part of F: and prepare to drag F: to shrink.<br />
<br />
<br />
<br />
Resize F to produce 10gb unallocated space and then click OK.<br />
<br />
<br />
<br />
Right click E to move.<br />
<br />
<br />
<br />
Click unallocated space and then click “Next”to move E to the right part of the unallocated space.<br />
<br />
<br />
<br />
It will automatically move E to the right part of the unallocated space and then click OK.<br />
<br />
<br />
<br />
We can see the unallocated space is next to the C partition.<br />
<br />
<br />
<br />
Right click C: drive to claim the unallocated 10gb.<br />
<br />
<br />
<br />
Put the cursor to the right part of the C drive and prepare to claim the unallocated 10gb.<br />
<br />
<br />
<br />
Drag C to the end of the allocated space to extend boot partition and then click OK.<br />
<br />
<br />
<br />
Click the flag to commit all the operations to extend the c drive.<br />
<br />
<br />
<br />
Click “Proceed” to confirm all the operations.<br />
<br />
<br />
<br />
Operations are completed.<br />
<br />
<br />
<br />
Check the extended C drive in disk management.<br />
<br />
<br />
<br /></div>
Keshava Prasadhttp://www.blogger.com/profile/07052995972860667346noreply@blogger.com0tag:blogger.com,1999:blog-1014233379913412533.post-40253450256149680472010-06-25T15:22:00.000+05:302010-06-25T15:23:50.171+05:30Outlook file locationsThe following is a list of data store and configuration files used by Microsoft Outlook. Some of the folders might be hidden folders. To view them, do one of the following:<br /><a class="DropDown" href="javascript:ToggleDiv(" sizset="2" sizcache="0">Windows XP</a><br />Click Start, and then click My Computer.<br />On the Tools menu, click Folder Options, click the View tab, and then click the Show hidden files and folder option.<br /><a class="DropDown" href="javascript:ToggleDiv(" sizset="3" sizcache="0">Windows 2000</a><br />Double-click My Computer on your desktop.<br />On the Tools menu, click Folder Options, click the View tab, and then click the Show hidden files and folder option.<br />Your configuration may not include all of the following files. Some files are created only when you customize Outlook features.<br /><a class="DropDown" href="javascript:ToggleDiv(" sizset="4" sizcache="0">Outlook data files (.pst)</a><br />drive:\Documents and Settings\<user>\Local Settings\Application Data\Microsoft\Outlook<br /><a class="DropDown" href="javascript:ToggleDiv(" sizset="5" sizcache="0">Offline Folders file (.ost)</a><br />drive:\Documents and Settings\<user>\Local Settings\Application Data\Microsoft\Outlook<br /><a class="DropDown" href="javascript:ToggleDiv(" sizset="6" sizcache="0">Personal Address Book (.pab)</a><br />drive:\Documents and Settings\<user>\Local Settings\Application Data\Microsoft\Outlook<br /><a class="DropDown" href="javascript:ToggleDiv(" sizset="7" sizcache="0">Offline Address Books (.oab)</a><br />drive:\Documents and Settings\<user>\Local Settings\Application Data\Microsoft\Outlook<br /><a class="DropDown" href="javascript:ToggleDiv(" sizset="8" sizcache="0">Command bar and menu customizations (.dat)</a><br />drive:\Documents and Settings\<user>\Application Data\Microsoft\Outlook<br /><a class="DropDown" href="javascript:ToggleDiv(" sizset="9" sizcache="0">Navigation Pane settings (.xml)</a><br />drive:\Documents and Settings\<user>\Application Data\Microsoft\Outlook\Outlook.xml<br />This file includes Shortcuts, Calendar, and Contact links.<br /><a class="DropDown" href="javascript:ToggleDiv(" sizset="10" sizcache="0">Registered Microsoft Exchange extensions (.dat)</a><br />drive:\Documents and Settings\<user>\Local Settings\Application Data\Microsoft\Outlook<br /><a class="DropDown" href="javascript:ToggleDiv(" sizset="11" sizcache="0">Outlook contacts nicknames (.nk2)</a><br />drive:\Documents and Settings\<user>\Application Data\Microsoft\Outlook<br /><a class="DropDown" href="javascript:ToggleDiv(" sizset="12" sizcache="0">Rules (.rwz)</a><br />drive:\Documents and Settings\<user>\Application Data\Microsoft\Outlook<br />If you upgraded from a version of Outlook prior to Outlook 2002, you may have a .rwz file on your computer hard disk drive. The file is no longer needed and the rules information is now kept on the server for Microsoft Exchange e-mail accounts, and within the <a class="glossary" href="javascript:AppendPopup(this,">personal folders file (.pst) (Personal Folders file (.pst): Data file that stores your messages and other items on your computer. You can assign a .pst file to be the default delivery location for e-mail messages. You can use a .pst to organize and back up items for safekeeping.)</a> for POP3 and IMAP e-mail accounts. You can delete the file.<br />If you use the rules import or export feature, the default location for .rwz files is drive:\Documents and Settings\<user>\My Documents.<br /><a class="DropDown" href="javascript:ToggleDiv(" sizset="13" sizcache="0">Print styles (Outlprnt with no extension)</a><br />drive:\Documents and Settings\<user>\Application Data\Microsoft\Outlook<br /><a class="DropDown" href="javascript:ToggleDiv(" sizset="14" sizcache="0">Signatures (.rtf, .txt, .htm)</a><br />drive:\Documents and Settings\<user>\Application Data\Microsoft\Signatures<br /><a class="DropDown" href="javascript:ToggleDiv(" sizset="15" sizcache="0">Stationary (.htm)</a><br />drive:\Documents and Settings\<user>\Application Data\Microsoft\Stationary<br /><a class="DropDown" href="javascript:ToggleDiv(" sizset="16" sizcache="0">Custom forms</a><br />drive:\Documents and Settings\<user>\Local Settings\Application Data\Microsoft\Forms<br /><a class="DropDown" href="javascript:ToggleDiv(" sizset="17" sizcache="0">Dictionary (.dic)</a><br />drive:\Documents and Settings\<user>\Application Data\Microsoft\Proof<br /><a class="DropDown" href="javascript:ToggleDiv(" sizset="18" sizcache="0">Templates (.oft)</a><br />drive:\Documents and Settings\<user>\Application Data\Microsoft\Templates<br /><a class="DropDown" href="javascript:ToggleDiv(" sizset="19" sizcache="0">Send/Receive settings (.srs)</a><br />drive:\Documents and Settings\<user>\Application Data\Microsoft\Outlook<br /><a class="DropDown" href="javascript:ToggleDiv(" sizset="20" sizcache="0">Message (.msg, .htm, .rtf)</a><br />drive:\Documents and Settings\<user>\My DocumentsKeshava Prasadhttp://www.blogger.com/profile/07052995972860667346noreply@blogger.com0tag:blogger.com,1999:blog-1014233379913412533.post-44792437763502011332010-06-25T14:32:00.001+05:302010-06-25T14:36:34.594+05:30wordle<a title="Wordle: geekcomptips" href="http://www.wordle.net/show/wrdl/2190578/geekcomptips"><img style="BORDER-RIGHT: #ddd 1px solid; PADDING-RIGHT: 4px; BORDER-TOP: #ddd 1px solid; PADDING-LEFT: 4px; PADDING-BOTTOM: 4px; BORDER-LEFT: #ddd 1px solid; WIDTH: 201px; PADDING-TOP: 4px; BORDER-BOTTOM: #ddd 1px solid; HEIGHT: 130px" height="120" alt="Wordle: geekcomptips" src="http://www.wordle.net/thumb/wrdl/2190578/geekcomptips" width="470" /></a><br /><br /><a href="http://www.wordle.net/">http://www.wordle.net/</a><br />Wordle is a toy for generating “word clouds” from text that you provide. The clouds give greater prominence to words that appear more frequently in the source textKeshava Prasadhttp://www.blogger.com/profile/07052995972860667346noreply@blogger.com0tag:blogger.com,1999:blog-1014233379913412533.post-43852510382987790022010-06-16T16:33:00.002+05:302010-06-16T16:36:07.175+05:30"The address list could not be displayed"Symptoms : If you attempt to address a new message from your Contacts, you may receive the following error message:<br />The address list could not be displayed. The Contacts folder associated with this address list could not be opened; it may have been moved or deleted, or you do not have permissions. For information on how to remove this folder from the Outlook Address Book, see Microsoft Outlook Help.<br /><br />Cause : This behavior can occur if the Microsoft Outlook Address Book is damaged.<br /><br />Solution : To resolve this issue, remove and reinstall the Outlook Address Book. To do this:<br />Start Outlook.<br />On the Tools menu, click E-mail Accounts.<br />Click View or change existing directories or address books, and then click Next.<br />Click Outlook Address Book, and then click Remove.<br />Click Yes when you receive the prompt to confirm the removal.<br />Click Add.<br />Click Additional Address Books, and then click Next.<br />Click Outlook Address Book, and then click Next.<br />Click OK when you receive the message to restart Outlook.<br />Click Finish.<br />Click Exit on the File menu to quit Outlook.<br />Restart Outlook.<br />In the Folder list, right-click the folder that you want to use with the Address Book (for example, right-click Contacts), and then click Properties.<br />Click the Outlook Address Book tab.<br />Click to select the Show this folder as an e-mail Address Book check box (if it is not already selected), and then click OK<br /><br />APPLIES TO<br />Microsoft Office Outlook 2003<br />Microsoft Outlook 2002 Standard EditionKeshava Prasadhttp://www.blogger.com/profile/07052995972860667346noreply@blogger.com0tag:blogger.com,1999:blog-1014233379913412533.post-77624142069038566072010-06-14T15:14:00.002+05:302010-06-16T15:12:37.385+05:30Windows Xp Password Reset (Forgotten)<hr /><br /><p>If that�s your only problem, then you probably have nothing to worry about. As long as you have your Windows XP CD, you can get back into your system using a simple but effective method made possible by a little known access hole in Windows XP.</p><p>This method is easy enough for newbies to follow � it doesn�t require using the Recovery Console or any complicated commands. And it�s free - I mention that because you can pay two hundred dollars for an emergency download of Winternals ERD with Locksmith which is a utility for unlocking lost Windows passwords. See here <a href="http://www.winternals.com/products/repairandrecovery/locksmith.asp" target="_blank">http://www.winternals.com/products/repairandrecovery/locksmith.asp</a></p><p>ERD is an excellent multi purpose product, but you should know it is not a necessary one if you have a healthy system and your sole problem is the inability to logon to Windows due to a forgotten password. Not necessary because you can easily change or wipe out your Administrator password for free during a Windows XP Repair. Here�s how with a step-by-step description of the initial Repair process included for newbie�s.</p><blockquote><p>1. Place your Windows XP CD in your cd-rom and start your computer (it�s assumed here that your XP CD is bootable � as it should be - and that you have your bios set to boot from CD)</p><p>2. Keep your eye on the screen messages for booting to your <span class="GramE">cd Typically</span>, it will be �Press any key to boot from cd�</p><p>3. Once you get in, the first screen will indicate that Setup is inspecting your system and loading files.<br /><br />4. When you get to the <b>Welcome to Setup</b> screen, <b>press ENTER to Setup Windows now</b></p><p>5. The <b>Licensing Agreement</b> comes next - Press<b> F8</b> to accept it.</p><p>6. The next screen is the <b>Setup</b> screen which gives you the option to do a Repair.<br /><br />It should read something like �If one of the following Windows XP installations is damaged, Setup can try to repair it�</p><p>Use the up and down arrow keys to <b>select your XP installation</b> (if you only have one, it should already be selected) and <b>press R to begin the Repair process.</b></p><p>7. Let the Repair run. Setup will now check your disks and then start copying files which can take several minutes.</p><p>8. Shortly after the Copying Files stage, you will be required to reboot. (<span class="GramE">this</span> will happen automatically � you will see a progress bar stating �Your computer will reboot in 15 seconds�</p><p>9. During the reboot, do not make the mistake of �pressing any key� to boot from the CD again! Setup will resume <span class="GramE">automatically with</span> the standard billboard screens and you will notice <b>Installing Windows</b> is highlighted.</p><p>10. Keep your eye on the lower left hand side of the screen and when you see the <b>Installing Devices</b> progress bar<span class="GramE">, press</span> <b>SHIFT + F10</b>. This is the security hole! A command console will now open up giving you the potential for wide access to your system.</p><p>11. At the prompt, type <b>NUSRMGR.<?xml:namespace prefix = st1 /><st1:stocktickeruk st="on"><st1:stocktickerca st="on">CPL</st1:stocktickerca></st1:stocktickeruk></b> and <b>press Enter</b>. Voila! You have just gained graphical access to your <b>User Accounts</b> in the Control Panel.</p><p>12. Now simply pick the account you need to change and remove or change your password as you prefer. If you want to log on without having to enter your new password, you can type <b>control userpasswords2</b> at the prompt and choose to log on without being asked for password. After you�ve made your changes close the windows, exit the command box and continue on with the Repair (have your Product key handy).</p><p>13. Once the Repair is done, you will be able to log on with your new password (or without a password if you chose not to use one or if you chose not to be asked for a password). Your programs and personalized settings should remain intact.</p></blockquote><p>I tested the above on Windows XP Pro with and without SP1 and also used this method in a real situation where someone could not remember their password and it worked like a charm to fix the problem. This security hole allows access to more than just user accounts. You can also access the Registry and Policy Editor, for example. And its <span class="GramE">gui</span> access with mouse control. Of course, a Product Key will be needed to continue with the Repair after making the changes, but for anyone intent on gaining access to your system, this would be no problem.</p><p>And in case you are wondering, NO, you cannot cancel install after making the changes and expect to logon with your new password.</p><p>Cancelling will just result in Setup resuming at bootup and your changes will be lost.</p><p> </p>Keshava Prasadhttp://www.blogger.com/profile/07052995972860667346noreply@blogger.com0tag:blogger.com,1999:blog-1014233379913412533.post-55177257013795104912010-05-27T16:48:00.003+05:302010-05-27T16:59:01.692+05:30HDD Space full check symantec logsIf your hdd space is full but your windows using less space.<br />then check the below path if you are using symantec some logs will be created of 12gb like below.<br /><br /><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhqvm9qKKe0_i4PakISuKPK5pU2taFXnff1sunQZCUTEg0e2SNZ5YneA89kQ2na__RbFH0EG4aKH4b_RT3VC-N32au3nizRIJwMGjTs2Rpr24tWVx1MX_l8uUjrw0gQ20H5FY95wNAByTW3/s1600/antivirus.bmp"><img id="BLOGGER_PHOTO_ID_5475909050378926018" style="FLOAT: left; MARGIN: 0px 10px 10px 0px; WIDTH: 389px; CURSOR: hand; HEIGHT: 309px" alt="" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhqvm9qKKe0_i4PakISuKPK5pU2taFXnff1sunQZCUTEg0e2SNZ5YneA89kQ2na__RbFH0EG4aKH4b_RT3VC-N32au3nizRIJwMGjTs2Rpr24tWVx1MX_l8uUjrw0gQ20H5FY95wNAByTW3/s320/antivirus.bmp" border="0" /></a><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br />Delete the logs which is in green and check the path in the taskbar.Keshava Prasadhttp://www.blogger.com/profile/07052995972860667346noreply@blogger.com1tag:blogger.com,1999:blog-1014233379913412533.post-827632721165772052010-05-15T16:04:00.000+05:302010-05-15T16:05:47.213+05:30To restart the management agents on ESX hostTo restart the management agents on ESX host:<br /><br /> 1.Log in to your ESX Server as root from either an SSH session or directly from the console of the server.<br /> 2.Type service mgmt-vmware restart.<br /><br /> Caution: Ensure Automatic Startup/Shutdown of virtual machines is disabled before running this command or you risk rebooting the virtual machines. For more information, see Restarting hostd (mgmt-vmware) on ESX Server Hosts Restarts Hosted Virtual Machines Where Virtual Machine Startup/Shutdown is Enabled (1003312) and Determining whether virtual machines are configured to autostart (1000163).<br /> 3.Press Enter.<br /> 4.Type service vmware-vpxa restart.<br /> 5.Press Enter.<br /> 6.Type logout and press Enter to disconnect from the ESX host.<br /><br />If this process is successful, it appears as:<br /> <br />[root@server]# service mgmt-vmware restart<br />Stopping VMware ESX Server Management services:<br />VMware ESX Server Host Agent Watchdog [ OK ]<br />VMware ESX Server Host Agent [ OK ]<br />Starting VMware ESX Server Management services:<br />VMware ESX Server Host Agent (background) [ OK ]<br />Availability report startup (background) [ OK ]<br />[root@server]# service vmware-vpxa restart<br />Stopping vmware-vpxa: [ OK ]<br />Starting vmware-vpxa: [ OK ]<br />[root@server]#Keshava Prasadhttp://www.blogger.com/profile/07052995972860667346noreply@blogger.com0tag:blogger.com,1999:blog-1014233379913412533.post-1338255680906288782010-05-15T15:52:00.002+05:302010-05-15T15:58:30.749+05:30Changing the IP for the Service Console (ESX)Changing settings f rom the physical or remote console connection<br />Changing the IP for the Service Console must be done from the physical console or through a remote console session. If you make changes through a network connection such as SSH, network connectivity to the Service Console disconnects because the Service Console's network interface changes.<br /><br /> 1. Run the following command to set the IP address:<br /><br /> [root@server root]# esxcfg-vswif -i <a.b.c.d> -n <w.x.y.z> vswif0 , where <a.b.c.d> is the IP address and <w.x.y.z> is the subnet mask.<br /><br /> Note: In this example, v swif0 is the Service Console adapter that is the interface to which you are applying the IP address change.<br /><br /> 2. Open the /etc/hosts file with a text editor and modify it so that it reflects the correct IP address and hostname.<br /> 3. To change the default gateway address and the hostname, edit the /etc/sysconfig/network file and change the GATEWAY and HOSTNAME parameters to the proper values.<br /> 4. For the changes to take place, reboot the host or restart the network service with the command:<br /><br /> [root@server root]# service network restart<br /><br /> Note: This command breaks any current network connections to the Service Console. <br /><br />Changing the hostname without rebooting<br />To dynamically change the hostname, run the command:<br /> <br />[root@server root]# hostname newname<br /><br />Note: This command creates a temporary hostname change. This change is lost when the system is rebooted.<br /> <br />Changing the DNS server settings<br /> <br />To change the DNS server settings, update the nameserver IPs and search domain the /etc/resolv.conf file.<br /> <br />Changing settings in VMware vSphere or Infrastructure Client<br /> <br />To change the hostname, domain, DNS servers, and default gateway in VMware vSphere or Infrastructure (VI) Client:<br /><br /> 1.Highlight the ESX host and click the Configuration tab.<br /> 2.Click DNS and Routing.<br /> 3.Click Properties.<br /> 4.To change the hostname, domain, and DNS servers, click the DNS Configuration tab and enter the appropriate values.<br /><br /> Note: Disable VMware High Availability if you do not want virtual machines to failover during the hostname IP change.<br /><br /> 5.To change the default gateway, click the Routing tab and enter the appropriate value.<br /> 6.Update the etc/opt/vmware/vpxa/vpxa.cfg file to reflect the new settings.<br /> 7.Reboot the ESX host for the changes to take place .Keshava Prasadhttp://www.blogger.com/profile/07052995972860667346noreply@blogger.com0tag:blogger.com,1999:blog-1014233379913412533.post-90359197431703943212010-05-15T15:48:00.001+05:302010-05-15T15:50:31.335+05:30SSH sessions to the ESX Service ConsoleNote: Each SSH connection to an ESX host uses additional Service Console resources. Use caution when using scripts or third party software that create multiple SSH sessions to the ESX Service Console. Excessive use of SSH on an ESX machine may cause the service console to exhibit symptoms of memory exhaustion.<br /><br />To enable root login for SSH and SCP clients:<br /><br /> 1.If you have physical access to the ESX host, login to the console of your ESX host as the root user .<br /><br /> If you can only connect to the ESX host over the network, connect using an SSH client (such as PuTTY) and log in as a user other than root. After you are logged in, switch to the root user with the following command:<br /><br /> su -<br /> Note: If you do not have any other users on the ESX host, you can create a new user by connecting directly to the ESX host with VMware Infrastructure (VI) or vSphere Client. Go to the Users & Groups tab, right-click on the Users list and select Add to open the Add New User dialog. Ensure the Grant shell access to this user option is selected. These options are only available when connecting to the ESX host directly. They are not available if connecting to vCenter Server.<br /> <br /> 2.Edit the configuration file for SSH with the following command:<br /><br /> nano /etc/ssh/sshd_config<br /> <br /> 3.Find the line that starts with PermitRootLogin and change the no to yes. You can find this line about 2 pages down from the top. Save the file by first pressing Ctrl-O and then Enter. Exit with Ctrl-X.<br /> <br /> 4.Restart the sshd service with the command:<br /><br /> service sshd restart<br /><br /> Note: Alternatively, use the command:<br /><br /> /etc/init.d/sshd restartKeshava Prasadhttp://www.blogger.com/profile/07052995972860667346noreply@blogger.com0tag:blogger.com,1999:blog-1014233379913412533.post-9550619055480035832010-03-26T15:36:00.000+05:302010-05-15T16:15:07.586+05:30System Restore for Windows XPSystem Restore for Windows XP
<br />
<br />How the System Restore Utility Uses Drive Letters Information on System Restore and Password Restoration
<br />How to Disable the System Restore Configuration Non-Admin User Is Unable to Start System Restore Utility
<br />System Restore "Restore Points" Are Missing or Deleted Improper Shutdown May Affect System Restore
<br />Install Additional Files During Automated System Recovery How to Turn On and Turn Off System Restore in Win XP
<br />The Registry Keys and Values for the System Restore Utility Highlights of System Restore fixes included in SP1
<br />
<br />Microsoft Windows XP System Restore
<br />Bobbie Harder
<br />
<br />On the creation of a scheduled task for creating a restore point, System Restore does create a restore point every 24 hours IF the system is idle, but on and not in hibernate or standby, (idle meaning no disk i/o, mouse or keyboard activity).
<br />
<br />Too many restore points per day, and due to space limitations, cause older more valuable restore points potentially to be aged out, while ensuring additional space for perhaps duplicative restore points.
<br />
<br />Windows XP System Restore (Contents Include):
<br />
<br />Introduction, Detail, Design Overview, Automatically Created Restore Points, System and Application File Change
<br />Monitoring Restore Process, What's Restored and What's Not, Interoperation with Other Windows XP Recovery Features, Files Monitored and Restored by System Restore. For detailed information click here.
<br />
<br />How to Enable and Disable Windows XP's System Restore feature
<br />
<br />System Restore (restorept.api) is a new Windows XP feature that's similar to "Last Known Configuration." However, System Restore maintains multiple restore points instead of one last restore point. The user can manually create restore points, or System Restore can keep restore points during the following operations:
<br />
<br />Installing new software, if the application uses a current installer that is System Restore-compliant, Using AutoUpdate, During a restore operation, During a Microsoft backup or recovery operation, Installing an unsigned driver, Automatically following 24 hours of inactivity.
<br />
<br />By default, System Restore monitors all partitions. So, for example, if you delete an executable file, you can have the system state revert to a specific restore point to recreate or repair the executable file. When you revert to a restore point, however, you lose all changes since that point, except for changes to files in the My Documents folder and documents you've created with applications such as Microsoft Word and Microsoft Excel.
<br />
<br />If you use System Restore and don't like the new system state, you can undo the process and restore the machine to the system state it had before you ran System Restore. Alternatively, you can run System Restore to change the system state to a different restore point.
<br />
<br />To enable or disable System Restore, perform the following steps:
<br />
<br />Start the System Control Panel applet. Select the System Restore tab. Clear the "Turn off System Restore on all drives" check box to enable System Restore, or select this check box to disable System Restore. Click OK. Also here:
<br />
<br />To delete older restore points, but leave the system restore turned on: Right Click the Drive in question/Properties/Disk Cleanup/More Options/System Restore/Cleanup.
<br />
<br />You can also click the Settings button to set a maximum amount of space that you want each drive to use for restore information. If the drive you select isn't the system drive, you can also disable System Restore on a per-drive basis. The maximum amount of space that you can use for restore information is 12 percent per drive.
<br />
<br />An alternative to the usual method of enabling and disabling Windows XP's System Restore feature is to use the registry. To use this alternative, perform the following steps: Start the registry editor (regedit.exe).
<br />
<br />Go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SystemRestore.
<br />If a "DisableSR" value doesn't exist, go to the Edit menu, select New, DWORD value, and create the value.
<br />Set the value to 1 to disable System Restore or 0 to enable System Restore.
<br />
<br />Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\sr to prevent the System Restore service from starting.
<br />
<br />Double-click Start, and set the value to 4 to stop the service from starting or to 0 for normal startup. Close the registry editor.
<br />
<br />***Added Notes by: Barry Nordendale (7-9-05)
<br />
<br />"After making SR disabled in services, I tried to open SR (no reboot) in CP/Services it said SR is off, would you like to turn on. I said yes and everything works fine now!"
<br />
<br />System Restore Usage
<br />
<br />System Restore Requirements:
<br />
<br />System Restore is automatically installed and configured on Windows XP if your computer has at least 200MB of free disk space after Windows XP is installed.
<br />
<br />Enabling System Restore:
<br />
<br />Right click my computer icon, properties. System Restore Tab, Clear "Turn Off System Restore on all Drives".
<br />
<br />Adjust System Restore Disk Usage
<br />
<br />By default, System Restore is given 12% of your hard disk space when you install Windows XP. Change amount: Right click my computer icon, properties. System Restore Tab, Settings.
<br />
<br />Creating Restore Points
<br />
<br />Start/Programs/Accessories/System Tools/System Restore. In the System Restore window, click "Create a Restore Point button, next. In the window that appears, enter a description. The date and time is created automatically.
<br />
<br />Running System Restore
<br />
<br /> If you can boot Windows:
<br />
<br /> Start/Programs/Accessories/System Tools/System Restore. Click the Restore My Computer to an earlier time, next.
<br />
<br /> If you cannot boot Windows:
<br />
<br /> Boot into safe mode. Click the System Restore link. Click the Restore My Computer to an earlier time, next.
<br />
<br />Note: Current documents, files and e-mail are not affected during a restoration.
<br />
<br />Undoing a Restoration
<br />
<br /> Reversing Restoration if you can boot your computer:
<br />
<br /> Start/Programs/Accessories/System Tools/System Restore. Click "Undo my last restoration", next. Click Ok to the
<br /> screen message after the reboot.
<br />
<br /> Reversing Restoration if you cannot boot your computer:
<br />
<br /> Boot into safe mode, follow the help screen and choose, "Undo my last restoration".
<br />
<br />Note: If you have chosen the wrong restore date, follow the steps under, "Undoing a Restoration".
<br />
<br />How and Where System Restore Points are saved:
<br />
<br />Restore points are saved in under x:\system volume information\_restore{558C94FD-3C7F-4954-A02D-
<br />26679E6D849E}. Each restore point's files are saved in a folder named RPXX where XX is a two digit number
<br />corresponding to the restore point.
<br />
<br />System Restore: Description and Functionality of Srdiag.exe
<br />
<br />The file Srdiag.exe is a tool developed specifically for capturing System Restore files and putting them into a text format or other format so that a support professional or an advanced user can easily view the contents of such files to try to diagnose problems that are occurring with System Restore.
<br />
<br />Srdiag.exe collects all information that is related to System Restore and puts it in a .cab file. The .cab file name is then
<br />automatically generated by using the computer name, followed by a timestamp for the month, day, and year, as well as a timestamp for the hour, minutes and seconds of the .cab file creation. More Information.
<br />
<br />What is restored on my machine when I use System Restore and what is not?
<br />The following are restored when you use System Restore to restore your system to a previous time using a restore point:
<br />
<br /> Registry
<br /> Profiles (local only—roaming user profiles not impacted by restore)
<br /> COM+ DB
<br /> WFP.dll cache
<br /> WMI DB
<br /> IIS Metabase
<br /> Files type which are monitored by System Restore as specified in the SDK available from http://msdn.microsoft.com/library/en-us/sr/sr/monitored_file_extensions.asp.
<br />
<br />The following are not restored by System Restore:
<br />
<br /> DRM settings
<br /> Passwords in the SAM hive.
<br /> WPA settings (Windows authentication information is not restored)
<br /> Specific directories/files listed in the Monitored File Extensions list in the System Restore section of the Platform SDK e.g. 'My Documents' folder.
<br /> Any file types not monitored by System Restore like personal data files e.g. .doc, .jpg, .txt etc.
<br /> Items listed in both Filesnottobackup and KeysnottoRestore (hklm->system->controlset001->control->backuprestore->filesnottobackup and keysnottorestore) in the registry.
<br /> User-created data stored in the user profile
<br /> Contents of redirected folders
<br />
<br />Troubleshooting System Restore in Windows XP
<br />
<br />To troubleshoot System Restore issues, try one or more of the following steps:
<br />
<br />- If you receive an error message that is related to System Restore, always make sure that you first record the error message
<br /> and follow the instructions that the error message contains to try to resolve the issue. Most System Restore issues generate
<br /> an error message that contains a description of the issue and suggestions for how to resolve the issue.
<br />- Make sure that you have enough disk space on all of the drives on which System Restore is enabled.
<br />- Make sure that the System Restore service is running by using one of the following methods:
<br />
<br />- Check in Control Panel:
<br />
<br />1. Click Start, click Control Panel, and then click "Performance and Maintenance".
<br />2. Click Administrative Tools, click Computer Management, and then click Services and Applications.
<br />3. Click Services, and then click System Restore Services.
<br />
<br />- Open a command prompt window:
<br />
<br />1. Click Start, click Run, and then type "CMD" (without the quotation marks).
<br />2. Press the ENTER key, and then type "Net Start" (without the quotation marks) at the command prompt to make sure that
<br /> the System Restore service is up and running.
<br />
<br />- Make sure that System Restore is enabled on the drives that you want System Restore enabled on.
<br />- Try to run System Restore in Safe mode.
<br />- If you suspect that you do not have as many restore points as you should have, make sure that the data store is the size that
<br /> you want the data store to be.
<br />
<br />- Check the event logs to investigate System Restore service errors:
<br />
<br />1. Click Start, click Control Panel, and then click "Performance and Maintenance".
<br />2. Click Administrative Tools, click Computer Management, double-click Event Viewer, and then click System.
<br />3. Click the Source tab to sort by name, and then look for "sr" or "srservice." Double-click each of these services, and then
<br /> evaluate the event description for any indication of the cause of the problem.
<br />
<br />System Restore cannot create a restore point. Please restart your computer
<br />
<br />Disable System Restore, reboot, then enable.
<br />
<br />System Restore Should Not Be Enabled During Program Installation
<br />
<br />When you first enable System Restore, this creates an initial restore point. If you enable System Restore during a program installation, this may corrupt the initial restore point.
<br />
<br />System Restore tracks changes to the registry and system files. By keeping a record of changes, System Restore can undo the changes to set the computer back to a previous state, which is also called a restore point. To create a restore
<br />point, use the System Restore program in the System Tools folder, which is on the Start menu.
<br />
<br />In Control Panel, you can enable and disable System Restore in System properties on the System Restore tab. When you disable System Restore, all previous restore points are lost because System Restore is no longer able to track changes and is
<br />therefore unable to undo those changes.
<br />
<br />When you re-enable System Restore, it creates an initial restore point. If you enable System Restore while you are installing a program, this may corrupt the initial restore point as well as all subsequent restore points. There is no way to determine if the initial restore point is corrupted.
<br />
<br />System Restore Tool Displays a Blank Calendar in Windows XP
<br />
<br />When you run the System Restore tool on a Windows XP-based computer, the calendar on the left side of the "Choose a Restore Point" window is not displayed. This behavior can occur if the file association for Hypertext Markup Language (HTML) component (.htc) files is not in the registry. To resolve this behavior, verify that the following keys are in the registry. Keys are listed here.
<br />
<br />How to Start the Windows XP System Restore Tool if You Can't Boot
<br />
<br />Boot into safe mode/Log on with Admin Privileges/ Type: %systemroot%\system32\restore\rstrui.exe. Then press enter.
<br />HOW TO: Restore Windows XP to a Previous State.
<br />
<br />VB Script to Run Unattended Restore Point Creation as a Scheduled Task by MS-MVP Doug Knox
<br />
<br />This VB Script can be run as a Scheduled Task to create an unattended System Restore Point. The Restore point will be identified as Automatic Restore Point with the date and time the script was run.
<br />
<br />Usage: Download xp_sysrestorepoint.vbs and save this file to your hard drive. Create a new Scheduled Task and point it to the VBS file. After the script runs, it will leave a dialog telling you whether or not the Restore Point was successfully created. This script can be viewed in Notepad or any text editor, as to the specific Registry key and value that are updated.
<br />
<br />Restore System Restore Points VBS Scripts by MS-MVP Bill James
<br />Download Here
<br />
<br />Create a System Restore Point Each Day
<br />MVP-Bill James
<br />
<br />Copy the following 3 lines to NotePad, then save it with .vbs extension (for example, CreateRP.vbs). You can run it manually to create a Restore Point by double clicking, or add it as a scheduled task.
<br />
<br />This script creates a System Restore Point for Windows XP.
<br />rp = "Manual Restore Point by " & WScript.ScriptName
<br />GetObject("winmgmts:\\.\root\default:Systemrestore").CreateRestorePoint rp, 0, 100
<br />
<br />Note: This script is not well suited for creating an unattended System Restore point, since it requires user intervention. The attached VB Script (modified from the original script) will do automate the process for a scheduled task.
<br />
<br />When you create a scheduled task for this script, you will need to give a user name and password with sufficient "permissions" to create a restore point. System Restore Points: By Doug Knox MS-MVP. Download Here.
<br />Unable to use System Restore due to "missing framedyn.dll. Please reinstall the application to fix this problem".
<br />
<br />A temporary fix to address this issue is to make the user copy the framedyn.dll file from \Windows\System32\WBEM directory to the \Windows\System32 directory.
<br />
<br />Re-Activation for Windows XP
<br />
<br />Should you restore your system to a point before you activated XP on your computer, the OS will forget that you activated it and you'll need to reactivate XP. If the system restore point is past the 30-day grace period that Microsoft allows for activation, you'll have to activate XP immediately.
<br />
<br />The only workaround to reactivating your system is to perform the following steps:
<br />
<br />Start your Windows installation in Minimal Safe mode.
<br />
<br />Move to the \%systemroot%\system32 folder.
<br />Rename wpa.dbl to wpa.noact.
<br />Rename wpa.bak to wpa.dbl.
<br />Reboot your system as normal.
<br />
<br />Note: The above procedure will work only if you've made no significant hardware changes.
<br />
<br />Highlights of System Restore fixes included in SP1
<br />
<br />1. Fix for SR not launching due to the framedyn.dll error you all have been reporting.
<br />
<br />2. No calendar availaible in the SR wizard to select restore points due to the the .htc file association being knocked out in the
<br /> registry has been fixed.
<br />
<br />3. A fix for SR failing restores. A lot of you were seeing failed restores when restoring to any restore point. Although some of
<br /> it was attributed to SR data store corruption, in most cases it was possibly due to locked file issues causing the restore
<br /> process to fail, especially in scenarios where fast user switching was used. This was a known issue which is now fixed in in
<br /> SP1.
<br />
<br /> This will hopefully resolve all cases for failed restores and it would be great if all of you running into this problem could
<br /> upgrade to SP1 and provide us feedback on this issue, whether it has resolved the problem for you or not.
<br />
<br />4. Fix for drive table inconsistency on a machine causing SR to not create restore points.
<br />
<br />5. Security fixes for SR to keep away those terrible hackers and viruses.
<br />
<br />So upgrade to SP1 and provide us with some feedback on your issues with SR and whether they are now resolved, especially when dealing with failed restores.
<br />
<br />Anshul Rawat [MS]
<br />System Restore, Windows XP
<br />
<br />Keshava Prasadhttp://www.blogger.com/profile/07052995972860667346noreply@blogger.com0tag:blogger.com,1999:blog-1014233379913412533.post-62329026316099015852010-03-16T21:48:00.000+05:302010-03-16T21:50:23.905+05:30VMware ESX and ESXi 3.5 ComparisonVMware ESX and ESXi 3.5 Comparison<br />Purpose<br />This article provides a detailed comparison of VMware ESX and ESXi 3.5. The article is separated into capabilities or features and compared at that level. <br />Resolution<br />Capability<br /> VMware ESX<br /> VMware ESXi<br /> <br />Service Console<br /> Service Console is a standard Linux environment through which a user has privileged access to the VMware ESX kernel. This Linux-based privileged access allows you to highly customize your environment by installing agents and drivers and executing scripts and other Linux-environment code.<br /> VMware ESXi is designed to make the server a computing appliance. Accordingly, VMware ESXi behaves more like firmware than traditional software. To provide hardware-like security and reliability, VMware ESXi does not support a privileged access environment like the Service Console of VMware ESX. To enable interaction with agents, VMware has provisioned CIM Providers through which monitoring and management tasks – traditionally done through Service Console agents – can be performed. VMware has provisioned RCLI to allow the execution of scripts.<br /> <br />Remote CLI<br /> VMware ESX Service Console has a host CLI through which VMware ESX can be configured. ESX 3.5 Update 2 supports RCLI.<br /> VMware ESX Service Console CLI has been ported to a Remote CLI (RCLI) for VMware ESXi. RCLI is a virtual appliance that interacts with VMware ESXi hosts to enable host configuration through scripts or specific commands.<br /><br /> <br /><br />Note: <br />RCLI is limited to read-only access for the free version of VMware ESXi. To enable full functionality of RCLI on a VMware ESXi host, the host must be licensed with VI Foundation, VI Standard, or VI Enterprise.<br /><br /><br />The VMware Infrastructure toolkit for Windows and the Perl toolkit access ESXi through the same API as RCLI. Similarly, these toolkits are limited to read-only access for the free version of VMware ESXi. When the host is upgraded to VI Foundation, VI Standard, or VI Enterprise, these toolkits have write-access and provide a scriptable method for managing ESXi hosts.<br /><br /><br />The following Service Console CLI commands have not been implemented in RCLI:<br />ESXcfg-info <br />ESXcfg-resgrp <br />ESXcfg-swiscsi <br /> <br />Scriptable Installation<br /> VMware ESX supports scriptable installations through utilities like KickStart.<br /> VMware ESXi Installable does not support scriptable installations in the manner ESX does, at this time. VMware ESXi does provide support for post installation configuration script using RCLI-based configuration scripts.<br /> <br />Boot from SAN<br /> VMware ESX supports boot from SAN. Booting from SAN requires one dedicated LUN per server.<br /> VMware ESXi may be deployed as an embedded hypervisor or installed on a hard disk. <br /><br /> <br /><br />In most enterprise settings, VMware ESXi is deployed as an embedded hypervisor directly on the server. This operational model does not require any local storage and no SAN booting is required because the hypervisor image is directly on the server.<br /><br /> <br /><br />The installable version of VMware ESXi does not support booting from SAN.<br /> <br />Serial Cable Connectivity<br /> VMware ESX supports interaction through direct-attached serial cable to the VMware ESX host.<br /> VMware ESXi does not support interaction through direct-attached serial cable to the VMware ESXi host at this time.<br /> <br />SNMP<br /> VMware ESX supports SNMP.<br /> VMware ESXi supports SNMP when licensed to a VI Foundation, VI Standard, or VI Enterprise edition. The free version of VMware ESXi does not support SNMP.<br /> <br />Active Directory Integration<br /> VMware ESX supports Active Directory integration through third-party agents installed on the Service Console.<br /> VMware ESXi with a Virtual Infrastructure license and in conjunction with VirtualCenter allows users to be authenticated via Active Directory. In this configuration, users can log in directly to an ESXi host and authenticate using a local username and password.<br /><br /> <br /><br />The free version of VMware ESXi does not support Active Directory integration at this time.<br /> <br />HW Instrumentation<br /> Service Console agents provide a range of HW instrumentation on VMware ESX.<br /> VMware ESXi provides HW instrumentation through CIM Providers. Standards-based CIM Providers are distributed with all versions of VMware ESXi. VMware partners may inject their own proprietary CIM Providers in customized versions of VMware ESXi. To obtain a customized version of VMware ESXi, you typically have to purchase a server with embedded VMware ESXi through a server vendor.<br /><br /> <br /><br />At this time, HP also offers its customized VMware ESXi Installable on http://www.vmware.com/. Dell, IBM, and FSC will soon offer their customized version of VMware ESXi on http://www.vmware.com/.<br /><br /> <br /><br />Remote console applications like Dell DRAC, HP iLO, IBM RSA, and FSC iRMC S2 are supported with ESXi.<br /><br /> <br /><br />Note: COS agents have a longer lineage than CIM Providers and are therefore more mature. VMware is actively working with its 250+ partners to close the CIM Provider–Service Console agent gap.<br /> <br />Software Patches and Updates<br /> VMware ESX software patches and upgrades behave like traditional Linux based patches and upgrades. The installation of a software patch or upgrade may require multiple system boots as the patch or upgrade may have dependencies on previous patches or upgrades.<br /> VMware ESXi patches and updates behave like firmware patches and updates. Any given patch or update is all-inclusive of previous patches and updates. That is, installing patch version “n” includes all updates included in patch versions n-1, n-2, and so forth.<br /> <br />VI Web Access<br /> VMware ESX supports managing your virtual machines through VI Web Access. You can use the VI Web Access to connect directly to the ESX host or to the VMware Infrastructure Client.<br /> VMware ESXi does not support web access at this time.<br /> <br />Licensing<br /> VMware ESX hosts can be licensed as part of a VMware Infrastructure 3 Foundation, Standard, or Enterprise suite.<br /><br /> <br /> VMware ESXi hosts can be individually licensed (for free) or licensed as part of a VMware Infrastructure 3 Foundation, Standard, or Enterprise suite.<br /><br /> <br /><br />Individually licensed ESXi hosts offer a subset of management capabilities (see SNMP and Remote CLI).<br /> <br />Jumbo Frames iSCSI with Jumbo Frames is not supported. Jumbo Frames are not supported for VMkernel networking interfaces in ESXi 3. In ESXi 3.5, Jumbo Frames are only supported on non-VMKernel network interfaces. For more information, see Enabling Jumbo Frames of the ESXi Server Configuration Guide. <br /><br /><br /> <br /> ESXi – Free License<br /><br />(ESX not available without VI)<br /> VI Foundation<br /><br />(with ESX or ESXi)<br /> VI Standard<br /><br />(with ESX or ESXi)<br /> VI Enterprise<br /><br />(with ESX or ESXi)<br /> <br />Core hypervisor functionality<br /> Yes<br /> Yes<br /> Yes<br /> Yes<br /> <br />Virtual SMP<br /> Yes<br /> Yes<br /> Yes<br /> Yes<br /> <br />VMFS<br /> Yes<br /> Yes<br /> Yes<br /> Yes<br /> <br />VirtualCenter Agent<br /> <br /> Yes<br /> Yes<br /> Yes<br /> <br />Update Manager<br /> <br /> Yes<br /> Yes<br /> Yes<br /> <br />Consolidated Backup<br /> <br /> Yes<br /> Yes<br /> Yes<br /> <br />High Availability<br /> <br /> <br /> Yes<br /> Yes<br /> <br />VMotion<br /> <br /> <br /> <br /> Yes<br /> <br />Storage VMotion<br /> <br /> <br /> <br /> Yes<br /> <br />DRS<br /> <br /> <br /> <br /> Yes<br /> <br />DPM<br /> <br /> <br /> <br /> YesKeshava Prasadhttp://www.blogger.com/profile/07052995972860667346noreply@blogger.com0tag:blogger.com,1999:blog-1014233379913412533.post-54649793573465488432010-03-16T21:44:00.001+05:302010-03-16T21:45:16.273+05:30VirtualCenter service does not start after rebootSymptoms<br />VirtualCenter service does not start after reboot<br />VMware Infrastructure (VI) Client cannot connect to VirtualCenter<br />You are using Microsoft SQL Server or SQL Express<br />VirtualCenter Server service can be started manually with no problems<br />Purpose<br />In some cases a race condition can occur and VirtualCenter starts before the SQL database it depends on.<br /> <br />This article provides steps to prevent the race condition from occurring.<br />Resolution<br />This issue may occur if the VirtualCenter Server service starts before one of the services it depends on. The VirtualCenter Server service is dependent on the following services:<br />SQL Services <br />ADAM Services (when using linked mode in vCenter Server 4.0) <br />To resolve this issue, add a dependency to the VirtualCenter service so that it only starts after the necessary services have started.<br /><br /><br />Note: This solution assumes that the database server and the SQL server reside on the same machine. If the SQL server is on a different physical machine, you must ensure that the SQL server is functioning before attempting to start the VirtualCenter service.<br /> <br />To create a service dependency:<br />Click Start > Run.<br />Type services.msc and press Enter.<br />Locate any services that VirtualCenter requires. For example, SQLEXP_VIM or ADAM_VCMSDS.<br />Open the service properties and note the Service Name. For example, MSSQL$SQLEXP_VIM .<br />In the Run dialog, type Regedit.exe and press Enter. Browse to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\vpxd.<br />Double-click the DependOnService key and add the Service name using the name identified in step 4.<br />Close Regedit.<br />Go back to the Services window and open the service properties for the service identified in step 3. <br />On the Dependencies tab, verify the VMware VirtualCenter service is listed as depending on the service. <br />Repeat steps 3 to 9 for any services that VirtualCenter requires.Keshava Prasadhttp://www.blogger.com/profile/07052995972860667346noreply@blogger.com0tag:blogger.com,1999:blog-1014233379913412533.post-19847566969958336362009-10-27T16:58:00.000+05:302009-10-27T17:15:11.400+05:30Change the registered owner of Windows with this Registry tweakProblem <br /><br />When you install Windows, the installation procedure prompts you to enter an owner name and a company name. Then, this information displays on the General tab of the System Properties dialog box under the Registered To heading. Unfortunately, Windows doesn't provide you with a tool for changing this registration information when transferring a system from one user to another. However, you can alter the registration information by editing the Registry. <br /><br />Warning <br /><br />Making manual changes to the Windows Registry can have negative consequences on a system. Always make a backup copy before you begin making changes. <br /> <br /><br /> <br />Solution <br /><br />Follow these seven steps to alter the owner and company information: <br /><br /> <br /><br />1. Launch the Registry Editor (Regedit.exe) <br /> <br /> <br /><br /> <br /><br />2. Go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\Current Version <br /> <br /> <br /><br /> <br /><br />3. Locate and double-click the RegisteredOwner value <br /> <br /> <br /><br /> <br /><br />4. When you see the Edit DWORD Value dialog box, change the Value Data setting to whatever owner name you want, and click OK <br /> <br /> <br /><br /> <br /><br />5. Locate and double-click the RegisteredOrganization value <br /> <br /> <br /><br /> <br /><br />6. When you see the Edit DWORD Value dialog box, change the Value Data setting to whatever company name you want, and click OK <br /> <br /> <br /><br /> <br /><br />7. Close the Registry Editor and restart Windows XP in order for the changes to take effect.Keshava Prasadhttp://www.blogger.com/profile/07052995972860667346noreply@blogger.com0tag:blogger.com,1999:blog-1014233379913412533.post-68930593980438138332009-06-24T16:06:00.003+05:302009-06-24T16:15:10.705+05:30Xp Search option Fix<div>Hi,</div><br /><div> </div><br /><div>If your search option is corrupted or Search windows is not comming properly </div><br /><div>here is the solution</div><br /><div>download the below reg file and merge it</div><br /><div> </div><br /><br />http://www.divshare.com/download/7455590-f11Keshava Prasadhttp://www.blogger.com/profile/07052995972860667346noreply@blogger.com0tag:blogger.com,1999:blog-1014233379913412533.post-78348219406604688832009-06-24T12:19:00.000+05:302017-01-25T14:50:17.523+05:30<br />By Scott Lowe<br />One of the most effective ways to secure a Windows workstation is to turn off unnecessary services. This reference sheet lists the Windows XP SP 2 services, describes each service's function, specifies whether you can safely disable the service, and outlines the ramifications of disabling the service. The list assumes the machines is running Windows XP SP2 in a corporate network environment. The list offers one of the following three possibilities for safely disabling each service:<br />• YES = You can disable the service without causing any problems.<br />• MAYBE = The computer's role dictates whether you should or should not disable the service--read the special considerations for further information.<br />• NO = The service is critical to proper Windows operation and should not be disabled.<br />Service<br />Description<br />Safely Disable?<br />Ramifications if disabled<br />Suggested setting<br />Special Considerations<br />Alerter<br />Notifies selected users and computers of administrative alerts<br />Yes<br />Programs that use administrative alerts will not receive them.<br />Disable<br />Application Layer Gateway<br />Provides support for application-level protocol plug-ins and enables network/protocol connectivity<br />Maybe<br />Programs that rely on this service, such as MSN Messenger and Windows Messenger will not function.<br />Enable<br />Only enable when using the Windows firewall or another firewall. Failure to do so can result in a significant security hole.<br />Application Management<br />Processes installation, removal, and enumeration requests for Active Directory IntelliMirror group policy programs<br />Yes<br />Users will be unable to install, remove, or enumerate any IntelliMirror programs.<br />Disable<br />Automatic Updates<br />Enables the download and installation of critical Windows updates<br />Yes<br />The operating system cannot automatically install updates, but can still be manually updated at the Windows Update Web site.<br />Enable<br />Automatic updates help keep your computer current. If you do disable the service, perform regular, manual updates.<br />Background Intelligent Transfer<br />Transfers data between clients and servers in the background<br />Yes<br />Features such as Windows Update will not work properly.<br />Disable<br />Enable this services if you enable Automatic Updates.<br />Keshava Prasadhttp://www.blogger.com/profile/07052995972860667346noreply@blogger.com0tag:blogger.com,1999:blog-1014233379913412533.post-15529598754245840472009-06-24T12:12:00.001+05:302009-06-24T12:15:14.821+05:30Speed Up Boot and Shutdown TimesSpeed Up Boot and Shutdown Times Hack #3<br />Shorten the time it takes for your desktop to appear when you turn on your<br />PC, and make XP shut down faster as well.<br />No matter how fast your PC boots, it’s not fast enough. Here are several<br />hacks to get you right to your desktop as quickly as possible after startup.<br />Perform a Boot Defragment<br />There’s a simple way to speed up XP startup: make your system do a boot<br />defragment, which will put all the boot files next to one another on your<br />hard disk. When boot files are in close proximity to one another, your system<br />will start faster.<br />On most systems, boot defragment should be enabled by default, but it<br />might not be on yours, or it might have been changed inadvertently. To<br />make sure that boot defragment is enabled on your system, run the Registry<br />Editor [Hack #83] and go to:<br />HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Dfrg\BootOptimizeFunction<br />Edit the Enable string value to Y if it is not already set to Y. Exit the Registry<br />and reboot. The next time you reboot, you’ll do a boot defragment.<br />I’ve found many web sites recommending a way of speeding<br />up boot times that might in fact slow down the amount of<br />time it takes to boot up and will probably slow down<br />launching applications as well. The tip recommends going to<br />your C:\WINDOWS\Prefetch directory and emptying it every<br />week. Windows uses this directory to speed up launching<br />applications. It analyzes the files you use during startup and<br />the applications you launch, and it creates an index to where<br />those files and applications are located on your hard disk. By<br />using this index, XP can launch files and applications faster.<br />So, by emptying the directory, you are most likely slowing<br />down launching applications. In my tests, I’ve also found<br />that after emptying the directory, it takes my PC a few seconds<br />longer to get to my desktop after bootup.<br />Hack Your BIOS for Faster Startups<br />When you turn on your PC, it goes through a set of startup procedures in its<br />BIOS before it gets to starting XP. So, if you speed up those initial startup<br />procedures, you’ll make your system start faster.<br />You can speed up your startup procedures by changing the BIOS with the<br />built-in setup utility. How you run this utility varies from PC to PC, but you<br />12 | Startup and Shutdown<br />#3 Speed Up Boot and Shutdown Times<br />HACK<br />typically get to it by pressing the Delete, F1, or F10 keys during startup.<br />You’ll come to a menu with a variety of choices. Here are the choices to<br />make for faster system startups:<br />Quick Power On Self Test (POST)<br />When you choose this option, your system runs an abbreviated POST<br />rather than the normal, lengthy one.<br />Boot Up Floppy Seek<br />Disable this option. When it’s enabled, your system spends a few extra<br />seconds looking for your floppy drive—a relatively pointless procedure,<br />especially considering how infrequently you use your floppy drive.<br />Boot Delay<br />Some systems let you delay booting after you turn on your PC so that<br />your hard drive gets a chance to start spinning before bootup. Most<br />likely, you don’t need to have this boot delay, so turn it off. If you run<br />into problems, however, you can turn it back on.<br />Fine-Tune Your Registry for Faster Startups<br />Over time, your Registry can become bloated with unused entries, slowing<br />down your system startup because your system loads them every time you<br />start up your PC. Get a Registry clean-up tool to delete unneeded Registry<br />entries and speed up startup times. Registry First Aid, shown in Figure 1-3,<br />is an excellent Registry clean-up tool. It combs your Registry for outdated<br />and useless entries and then lets you choose which entries to delete and<br />which to keep. It also creates a full Registry backup so that you can restore<br />the Registry if you run into a problem.<br />Registry First Aid is shareware and free to try, but it costs $21 if you decide<br />to keep using it. Download it from http://www.rosecitysoftware.com/<br />Reg1Aid/index.html.<br />After you clean out your Registry, you might want to try compacting it to get<br />rid of unused space. The Registry Compactor, available from http://www.<br />rosecitysoftware.com/RegistryCompactor/index.html, will do the trick. Compacting<br />your Registry reduces its size and decreases loading time. It’s shareware<br />and free to try, but it costs $19.95 if you decide to keep it.<br />Speed Up Shutdown Times<br />It’s not only startup times that you’d like to speed up; you can also make<br />sure that your system shuts down faster. If shutting down XP takes what<br />seems to be an inordinate amount of time, here are a couple of steps you can<br />take to speed up the shutdown process:<br />Speed Up Boot and Shutdown Times #3<br />Startup and Shutdown | 13<br />HACK<br />Don’t have XP clear your paging file at shutdown. For security reasons,<br />you can have XP clear your paging file (pagefile.sys) of its contents<br />whenever you shut down. Your paging file is used to store temporary<br />files and data, but when your system shuts down, information stays in<br />the file. Some people prefer to have the paging file cleared at shutdown<br />because sensitive information, such as unencrypted passwords, sometimes<br />ends up in the file. However, clearing the paging file can slow<br />shutdown times significantly, so if extreme security isn’t a high priority,<br />you might not want to clear it. To shut down XP without clearing your<br />paging file, run the Registry Editor and go to:<br />HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory<br />Management<br />Change the value of ClearPageFileAtShutdown to 0. Close the Registry<br />and restart your computer. Whenever you turn off XP from now on, the<br />paging file won’t be cleared, and you should be able to shut down more<br />quickly.<br />Turn off unnecessary services. Services take time to shut down, so the<br />fewer you run, the faster you can shut down. For information on how to<br />shut them down, see “Halt Startup Programs and Services” [Hack #4].Keshava Prasadhttp://www.blogger.com/profile/07052995972860667346noreply@blogger.com0